Search Results
76 results
- What settings do I use with the Infrared Remote Receiver with my Computer?
- WARNING! UNPLUG THE BATTERY CHARGER FROM THE IRR before you change any settings on the IRR, or change settings on the device connected to the IRR!When you are ready to use the IRR, plug the battery charger back in.
- What Settings do I use with the Infrared Remote Receiver with my Computer?
- WARNING! UNPLUG THE BATTERY CHARGER FROM THE IRR before you change any settings on the IRR or change settings on the device connected to the IRR!When you are ready to use the IRR, plug the battery charger back in.
- What Settings do I use with the Infrared Remote Receiver and my Computer?
- Turn the IRR over so that you are looking at the label on the bottom of the case.1. Button B Sets the Printer PortButton Out = Parallel Port is set for parallel printerButton In = Serial Port is set for serial printerSet Button B if you are connected to a printer.
- Troubleshooting: AAC Keys and Adjusting Settings
- Problem: Solution: The computer skips some characters when you send a large amount of text. Turn on Character Pacing in the Output MenuChoose a lower Baud Rate. Incorrect characters appear on your computer screen. Make sure the Baud Rate setting on your device matches the AAC Keys setting.
- Enabling the Phone Card on my Vantage/Vanguard.
- The first thing you must do after you install the Aircard, antenna, cable (if you ordered the cable) and SIM card from your regular cell phone (if you plan to make and receive calls), is to enable the Aircard.1. Go to the Toolbox and open the MAINTENANCE MENU.2. Select Hardware Diagnostics.
- Placing a Phone Call or Answering a Phone Call on the Vantage/Vanguard Plus.
- All of the Phone Tools are insertable tools: (Dial Pad, Dial Number, Send, Send Text Message, Text Messages). Use one of the storing menus in the Toolbox to store these tools under icon sequences or assign them to keys on your overlay.
- How do I Adjust Additional Settings in the Selection Technique Menu?
- Selection Technique Menu Basics:Scanning Speed: Scanning speed is the amount of time it takes the device to move from one key to the next in a scan. As the device scans, it beeps and highlights each key.
- How do I Make a Call With my Pathfinder Phone?
- Using the Dial PadThe Phone Dial Pad allows you to perform all phone functions: dialing calls, answering calls, using Minspeak to carry on conversations, sending text messages and receiving text messages. You can also configure the phone from the Dial Pad.Where is the Phone Activity Located?1.
- How do I Adjust my Tracker Settings in the Selection Technique Menu?
- Here is some basic information that will explain the terminology in our Selection Technique menu:Note: Not all Vantage Plus/Vanguard Plus units are equipped with Internal Tracker. This is an option that can be purchased in new units or can later be added as a modification.
- How do I Adjust the Settings in Tracker Mode on my ECO2?
- When selecting the Tracker as your Access Method, you can customize the settings to work best for you or the user:Windows Access SettingsMagnification works when your ECO is in a Windows application.
- Using the Enhanced Color Options in the ECO.
- In order to provide more options for individuals who want to make use of extended color coding, the ECO has the capability to fine tune color choices. A significant change is that the software makes use of the standard Windows Color Picker.
- How do I Adjust the Settings in Tracker Mode on my ECO?
- When selecting the Tracker as your Access Method, you can customize the settings to work best for you or the user:Acceptance TimeThis is the amount of time it takes from when you point to a key until the device beeps and accepts the selection.
- Changing the Advanced Settings in Output when Using the IRR.
- ****************************Important Note:**************************** These Settings should only be changed if more than one Infrared Remote Receiver is in use in the room. Adjusting these settings can prevent your IRR from working properly.
- What are the Default Settings for the User Defined Keys at the Top of the ECO?
- Below you will find the Default Settings for the keys on the top of the ECO when using Unity.There are eight recessed keys on the top front of the ECO case. The six keys with numbers on them are user-defined keys. This means that you can assign the tools that you want the keys to activate.
- Changing the Switch Mode Settings on the Bluetooth Switch.
- The Bluetooth Switch is set up at the factory to work with a PRC AAC device. You do not have to change Switch modes.To use the Bluetooth Switch with a computer you must change Switch Mode Settings on the BTS. You must also have the PRC Bluetooth Adapter.
- Setting up my ECO to Scan Properly with 1 Switch or 2 Switch Settings.
- 1 Switch Scanning OptionsWhen you select 1 Switch as an access method, you see a screen that contains a number of ways to scan with one switch. Below are brief descriptions of the technique terms.
- Set-Up of the Windows Access Settings in the Access Method Menu
- Windows Access SettingsUse this option to turn Windows Clicks ON, set the magnification option and set mouse sensitivity.
- Adjusting your Settings for use with Your ECOpoint
- The following menu options are listed in the order that should be most helpful for you to use them. Start by using the Eye Track Status option. When you have completed that, select Calibrate Now and see how things are working for you.
- Help, My ECOpoint won't Calibrate.
- If you are experiencing a problem when trying to calibrate the ECOpoint through the Calibrate Now key and the dot appears but the dot stays in the top left position, surging, then a setting may have been changed in the Access Method menu.
- When to Use Internal or External Computer Settings in ECO.
- What is the difference between Internal and External Destination in the Output Menu?If you are using the Integrated side or Windows within the ECO this is considered your Internal Computer Destination.Select INTERNAL if you are using the ECO's internal computer.
- 1 Switch Scanning using the Bluetooth Switch with ECO.
- The PRC ECO™-14 has a built in Bluetooth module. The Bluetooth Switch comes set up for 1-switch and 2-switch scanning with an AAC device. You do not have to change Switch Modes on the BTS.Setting up the Communication:1. Turn the BTS ON by sliding the I/O switch up2. Turn the AAC device ON.
- 2 Switch Scanning using the Bluetooth Switch and ECO2.
- The PRC ECO™-14 has a built in Bluetooth module. The Bluetooth Switch comes set up for 1-switch and 2-switch scanning with an AAC device. You do not have to change Switch Modes on the BTS.You will also receive a shielded Y cable for use with a second switch for 2 switch scanning.
- Adjusting your Settings for use with ECOpoint
- The following menu options are listed in the order that should be most helpful for you to use them. Start by using the Eye Track Status option. When you have completed that, select Calibrate Now and see how things are working for you.
- Getting Started with the ECOpoint.
- You will first want to make sure your ECO software is set to ECOpoint. This is done in the Toolbox, under Access Method Menu, Choose Different Access Method, then selecting ECOpoint.Your Current Access Method should read ECOpoint.
- Set-Up of the Windows Access Settings in the Access Method Menu
- Windows Access SettingsUse this option to turn Windows Clicks ON, set the magnification option and set mouse sensitivity.
- What are the Default Settings for the User Defined Keys at the Top of the ECO2?
- Below you will find the Default Settings for the keys on the top of the ECO2 when using Unity.There are eight recessed keys on the top front of the ECO case. The six keys with numbers on them are user-defined keys. This means that you can assign the tools that you want the keys to activate.
- Setting up the Output Menu in EssencePRO.
- You will use this menu if you purchased the integrated EssencePRO which has an internal computer. You will also use it if you connect to an external computer or printer.
- When to Use Internal or External Computer Settings in ECO2
- What is the difference between Internal and External Destination in the Output Menu?If you are using the Integrated side or Windows within the ECO this is considered your Internal Computer Destination.Select INTERNAL if you are using the ECO's internal computer.
- Setting the ECOpoint when Wearing Glasses.
- Eye Track Settings Adjust these settings if you wear glasses. Using Glasses If you are wearing glasses while you use the ECOpoint system, answer YES. If not, reply NO and OK to close the menu. Right and Left Diopter: This is your glasses prescription.
- Using the ToolBox (with Video)
- The Essence Tutorial contains more than 20 lessons. Working in the ToolBox will assist you in learning to use the toolbox to find and use tools for a variety of additional settings within Essence.This is a picture of the Device ToolBox.
- Adjusting the Settings for Word Prediction.
- You can set Word Predictions options so that words are predicted by how recently you have used them or by how frequently you use them. The WORD PREDICTION MENU is available on most Spelling Keyboards by select the TOOLS key and then selecting .
- How do I Adjust the Text Size in the Text Bar on EssenceVT?
- The size of the Text in the Text Bar on the top of your screen may be adjusted to suit your needs. You may need larger text because you have visual problems, or you may want smaller text for working in a notebook. To adjust the Text Size:1. Select the TOOLBOX key on the top of your device.
- How do I Adjust the Text Size in the Text Bar on EssenceVG?
- The size of the Text in the Text Bar on the top of your screen may be adjusted to suit your needs. You may need larger text because you have visual problems, or you may want smaller text for working in a notebook. To adjust the Text Size:1. Select the TOOLBOX key on the top of your device.
- Using a Microphone to Speak on the Phone.
- You can use the ECO's internal microphone, a Bluetooth headset microphone, or both, to speak on the phone if you are able to do this. Using a MicrophoneThere is a Microphone option in the Phone Configuration menu.
- Problem: Wivik Keyboard will not Send Text to Word Processor.
- There is an intermittent problem when running Windows Vista/7, 32bit, and WiViK 3.2, when clicking a key on the WiViK keyboard would result in WiViK receiving focus instead of the key being sent to the word processor. Meaning the letter selected in WiViK never makes it on the Word Document.
- Scanning in PASS
- The PASS software is not designed for evaluation purposes. It is recommended that to fully try the scanning process with a client that you use an actual device and the switch. However, you can use keyboard keys to demonstrate the different types of scanning methods.
- Using the System Lock Override Feature in System Lock (Featured)
- The addition of a System Lock Override tool has been added under the System Lock Menu. This System Lock Override tool has been added to simplify programming when System Lock it ON. By using this feature you will no longer need to turn the System Lock OFF to program the Vantage Lite.
- Using the System Lock Override Tool in System Lock Settings
- The addition of a System Lock Override tool has been added under the System Lock Menu. This System Lock Override tool has been added to simplify programming when System Lock it ON. By using this feature you will no longer need to turn the System Lock OFF to program the Vantage Lite.
- Using the System Lock Override Tool in System Lock Settings
- The addition of a System Lock Override tool has been added under the System Lock Menu. This System Lock Override tool has been added to simplify programming when System Lock it ON. By using this feature you will no longer need to turn the System Lock OFF to program the Vantage Lite.
- Using the Toolbox Drop-Down Menu
- The Toolbox drop-down menu contains shortcuts to some of the Toolbox menus and options. The menu is located to the right of the Status Display Area on your device. To access the menu you must press and release the menu key with your finger or have a USB mouse plugged in.
- About the Display Areas
- Your device has three main display areas besides the Touchscreen: the Text Display area, the Icon or Word Prediction Display area and the Status Display area.
- About the Toolbox and Maps in Accent
- MAPsMAP = Morphological Application ProgramWhen you purchased your PRC communication device you also selected one or more language systems to use with it, such as Unity® or Essence™. Within this language system there are many built-in MAPs to choose from which contain pre-defined vocabulary.
- Settings in the Maintenance Menu
- Maintenance Menu Options The MAINTENANCE MENU contains options related mostly to your device system. You will not use these options frequently, but may need to set one or two of them now and then to customize your device or check on and fix a system problem you may be having.
- MP3 Player Options and Settings
- MP3 Player Menu WARNING: PRC reminds you that music files fall under the jurisdiction of all copyright laws. In order to play music files on your device, you must have songs stored on a USB flash drive a Secure Digital card or the internal hard drive if you have that option.
- Reviewing the Functions of the Feedback Menu
- Feedback Menu Options The FEEDBACK MENU options give you information about what your device is doing and sometimes about what you are doing on the device. There are many options in the FEEDBACK MENU.
- How to Set Up the Output Menu
- The Output Menu Options You will use the OUTPUT MENU if your device has an internal computer or if you are connected to an external computer via the PRC Bluetooth Adapter.
- Setting up the Output Menu
- The Output Menu Options You will use the OUTPUT MENU if your device has an internal computer or if you are connected to an external computer via the PRC Bluetooth Adapter.
- Using the Touch Method to Access the Accent
- An Access Method is the method you use to control your device—touch, switch, etc. You select an access method, then you customize that method for your personal use by selecting the options you want. Touch MethodYou must be able to touch the keys on the screen to select them.
- Setting up 2 Switch Scanning in Accent
- An Access Method is the method you use to control your device—touch, switch, etc. You select an access method, then you customize that method for your personal use by selecting the options you want.
- Using an External Tracker with Accent
- An Access Method is the method you use to control your device—touch, switch, etc. You select an access method, then you customize that method for your personal use by selecting the options you want. External Headpointing MethodYou can use a USB Headpointer such as Madentec’s Tracker™.
- Using a USB Mouse or Joystick with Accent
- An Access Method is the method you use to control your device—touch, switch, etc. You select an access method, then you customize that method for your personal use by selecting the options you want. Most Standard USB Mouse and Joysticks should work with the Accent.
- Using the Settings Menu and Programming a Quick Key for Easy Access
- Save Your Set-Up SettingsDepending on the MAP you are using, you may be asked to select from three already-created Settings choices as part of a set-up wizard. If you want to change any of those choices, or if your MAP does not offer that option, use this menu.
- Why do my Songs not Sing in the Singing Page?
- If you like using one of the RealSpeak or AT&T voices but also like to sing the DecTalk songs on the Singing Page, you can simply use the Settings Menu to save your current voice in Settings 1 then change the Voice to DecTalk and save as Settings 2.
- Setting up a Voice in Speech Menu
- Speech Menu Options The SPEECH MENU is available for synthesized (computer) speech. From it you can choose the voice that you want your device to use for speaking messages. You can choose a different voice for auditory prompts. Other options allow you to refine the voice.
- Linking a Dynamic Activity to Core
- You make an Activity dynamic by linking it to an icon sequence in the DYNAMIC ACTIVITY MENU. Once the activity becomes a Dynamic Activity, you can be in any other Activity, go to the new Activity, speak a message and return automatically to the first Activity.
- Using the Icon Tutor
- Search Icon Tutor Available in the REVIEW VOCABULARY MENU.Use this option to help you find sequences for specific words.Let’s say you want to know where the word "dog" is stored. Select the Search Icon Tutor option. You see your Spelling page.
- Vocabulary Builder Menu Options/Settings
- Vocabulary Builder Menu Options Main Menu Options: Use Lists/Sets…Word ListSelect this option to load, merge, delete, rename or backup a World List.Load Word ListThis replaces everything currently in the UnmaskedWords and Phrases list with the Word List you have selected.
- To Turn WiFi Off or On
- When not in use, Wi-Fi will use a lot of battery energy. You can conserve your batteries by turning this feature OFF when not in use.To find out more about using Wi-Fi,see the Hardware manual that came in your device box.
- Setting the I/O Function and When you will be Required to Use the Back On/Off button
- Settings in the Maintenance MenuUnder Windows Power Management - I/O FunctionYou can choose what you want your device to do when you select the ON/OFF key on the front of the case to turn your device Off.The default is Stand By, with Hibernate and Shutdown as alternate choices.
- Access Method Menu / Eyegaze Settings and Descriptions (Featured)
- Within the Access Method Menu in the Toolbox and set to Eyegaze selection, there are many settings and features you can use and experiment with to allow the best access and ease of use.
- Instructions for the Initial ECOpoint Setup (Featured)
- Below you will find instructions to help you with the initial ECOpoint Setup.
- Select and Load an Eyegaze Profile
- The NuEye system has several pre-defined profiles that you can choose from to help you get started. These profiles contain eyegaze settings that have been selected to match the profile name.
- Calibrating the NuEye Eyegaze System
- Calibrate From the Eyegaze menu, select the Calibrate Now option. You see a grey screen. A small circle with a grey dot in the center appears. This is the Calibration Stimulus. Follow the dot with your eyes as it moves around the screen. You will hear a beep each time the stimulus moves.
- Customizing Eyegaze Settings and Calibration Settings (Featured)
- Please read the following details about the settings found under Customizing and Calibration Settings Keys to optimize the best use of your Eyegaze System:Customize Eyegaze Settings This menu gives you all the options that allow you to customize your eyegaze settings.
- Adjusting Windows Access Settings in Eyegaze
- Windows Access Settings (located under Customize Eyegaze Settings Menu)Magnify Window Clicks ON This means you can select an area in your Windows application and it will appear in a magnified box. This makes it easier for you to select the options you want in your application.
- Customizing the Pointer Settings in Eyegaze.
- Pointer Settings (located under Customize Eyegaze Settings Menu) Highlight Keys This puts a red highlight box around each key your cursor moves to.
- Customizing the Tracking Settings in Eyegaze
- Tracking Settings (found under Customize Eyegaze Settings Menu) These settings help to adjust the speed and smoothness of your pointer/cursor movements.
- Description of the Advanced Settings for Eyegaze
- Advanced Settings (found under Customize Eyegaze Settings Menu) Fixation Window X Fixation Window Y These two options refer to the point at which you stop looking at the screen in general and begin to fixate on the area where you want to make a selection.
- Reset Eyegaze to Default Settings
- This option is found under Customize Eyegaze Settings Key in Access Method Menu.Use this option when you want to start over with the default settings for Eyegaze.
- Using the System Lock Override Tool on Accent
- This System Lock Override tool has been added to simplify programming when System Lock it ON. By using this feature you will no longer need to turn the System Lock OFF to program the Accent 1200.How it works: 1.
- Adjusting Settings in Windows Power Management Menu
- Windows Power ManagementWindows Power Management is an option in the MAINTENANCE MENU in your device’s Toolbox. You can use the options in this menu whether your device has an internal computer or not. I/O Function (ON/OFF button)The choices are Disable, Sleep, Hibernate, Shutdown.
- Using the System Lock Settings in Accent
- System Lock When System Lock is ON you can still use your vocabulary to speak but the use of the TOOLS key on the front of the case is severely limited. Only certain menus in the Toolbox will work.
- Using the System Lock Settings in Accent
- System Lock When System Lock is ON you can still use your vocabulary to speak but the use of the TOOLS key on the front of the case is severely limited. Only certain menus in the Toolbox will work.
- Using the System Lock Settings in Accent
- System Lock When System Lock is ON you can still use your vocabulary to speak but the use of the TOOLS key on the front of the case is severely limited. Only certain menus in the Toolbox will work.
- Using the System Lock Settings in Accent
- System Lock When System Lock is ON you can still use your vocabulary to speak but the use of the TOOLS key on the front of the case is severely limited. Only certain menus in the Toolbox will work.
- Using the Settings menu and Programming a Quick key for Easy Access
- Save Your Set-Up Settings Depending on the MAP you are using, you may be asked to select from three already-created Settings choices as part of a set-up wizard. If you want to change any of those choices, or if your MAP does not offer that option, use this menu.
