Saving and Loading Vocabulary / Importing Icons
Articles
- How do I Delete Imported Icons in my Vantage/Vanguard 2?
-
Deleting Imported Icons from your Vantage:You can simply delete imported icons from your device in any programming screen that has the optio...
- How do I Import Photos or Icons using a cable or USB flash disk, (software version 4.0 or higher)?
-
To Import Icons or Photos using a USB Flash Disk:NOTE:Â Your photos must have a BMP, JPG, GIF, or PNG extension for the Vantage/Vanguard to...
- How do I Transfer Memory from One Vantage/ Vanguard to Another?
-
When you plug the MTI-Serial cable (also known as 11819 or Null Modem) into the SERIAL PORT connector on the side of each device, you can...
- How do I Transfer My Notebook to a PC using my Serial Port?
-
IMPORTANT!! Make sure the battery charger is plugged in before transferring any Notebooks. You can save your Notebooks on a disk or trans...
- Importing Icons to a Vantage/Vanguard with 3.04 software or Lower.
-
You CAN import icons into a Vantage/Vanguard from the USB thumb drive, but you must first convert it to a .mti file.  To do this:Note: Â...
- Memory Transfer Using the Serial Port with a Vantage/Vanguard and PC Computer.
-
Important: Your device and computer should both be OFF before plugging anything into the connectors/ports.If you have never done a Memory Tr...
- Transferring Memory from an Older Vantage/Vanguard to Another VT/VG
-
By plugging the MTI Serial VG to IBM/PC cable into the serial port on each Vanguard/Vantage, you can transfer vocabulary from one Vanguard...
- Transferring Memory from the Serial port on a Vantage/Vanguard to a Mac.
-
1. Turn your communication aid and your computer OFF.2. All memory transfers should be made with the battery charger plugged in. Plug the sm...
- Transferring Memory Using a USB or SD Card with a Vantage/Vanguard.
-
PRC SERVICE DISCLAIMERThe PRC Service Department is not responsible for lost vocabulary on devices returned for service.Before you return a...