ECOpoint
Articles
- ECOpoint Cheat Sheet (Featured)
-
Please click on the following link for instructions about using ECOpoint....
- How do I Reset the ECOpoint? (Featured)
-
If your ECOpoint is just not responding the way it should and you have verified that your Eye Track Status is positioned correctly and you h...
- Adjusting your Settings for use with Your ECOpoint
-
The following menu options are listed in the order that should be most helpful for you to use them. Start by using the Eye Track Status opti...
- ECO must have 1.07 Software to run ECOpoint.
-
Important information about your Software and ECOpoint: If your device was shipped after August 20, 2009 and is serial number 1645E14 or hi...
- Getting Started with the ECOpoint.
-
You will first want to make sure your ECO software is set to ECOpoint. This is done in the Toolbox, under Access Method Menu, Choose Dif...
- Help, My ECOpoint won't Calibrate.
-
If you are experiencing a problem when trying to calibrate the ECOpoint through the Calibrate Now key and the dot appears but the dot st...
- Mounting the ECOpoint to your ECO Device.
-
Extremely Important—Before You BeginSkip this section if the ECOpoint is already mounted on your ECO-14.Go to Article 825 to learn about...
- Set-Up of the Windows Access Settings in the Access Method Menu
-
Windows Access SettingsUse this option to turn Windows Clicks ON, set the magnification option and set mouse sensitivity.Windows ClicksInser...
- Setting the ECOpoint when Wearing Glasses.
-
Eye Track Settings Adjust these settings if you wear glasses. Using Glasses If you are wearing glasses while you use the ECOpoint system,...
- Tips for Getting into the Proper Position when Using the ECOpoint.
-
Positioning the ECOpoint and Getting StartedThe positioning of the EcoPoint system in relation to the user is extremely important. Because...
- Why did I receive an error message while calibrating my ECOpoint?
-
If you receive the error message “The format of the primary calibration stimulus file is not supported”, while attempting to calibrate t...