Bluetooth Switch
Articles
- 1 Switch Scanning Using the Bluetooth Switch with the ECO.
-
The PRC ECO™-14 has a built in Bluetooth module. The Bluetooth Switch comes set up for 1-switch and 2-switch scanning with an AAC device...
- 1 Switch Scanning with the SpringBoard Lite and Bluetooth Switch.
-
In order for the Bluetooth Switch (BTS) to work with a communication device, the device must have a PRC Bluetooth Module installed in it. ...
- 2 Switch Scanning Using the Bluetooth Switch and the ECO.
-
The PRC ECO™-14 has a built in Bluetooth module. The Bluetooth Switch comes set up for 1-switch and 2-switch scanning with an AAC device...
- 2-Switch Scanning Using the Bluetooth Switch and the SpringBoard Lite.
-
In order for the Bluetooth Switch (BTS) to work with a communication device, the device must have a PRC Bluetooth Module installed in it. ...
- Changing the Switch Mode Settings on the Bluetooth Switch.
-
The Bluetooth Switch is set up at the factory to work with a PRC AAC device. You do not have to change Switch modes.To use the Bluetooth S...
- Computer Access with the Bluetooth Switch and the Bluetooth Adapter.
-
To use the Bluetooth Switch with a computer you must have the PRC Bluetooth Adapter and a computer that has a USB port available. You may al...
- How do I Charge the Bluetooth Switch?
-
Turn the BTS OFF and charge the battery before using the BTS for the first timeA full charge will take approximately 7 hours.The battery w...
- What are the Features/Icons on the Bluetooth Switch.
-
Turns the BTS ON or OFF. Slide UP for ON and DOWN for OFF. When ON, the green LED will light for 1-3 seconds while the switch powers u...