Switch Access
Articles
- 1 Switch Scanning with the Springboard Lite and Bluetooth Switch.
-
In order for the Bluetooth Switch (BTS) to work with a communication device, the device must have a PRC Bluetooth Module installed in it. ...
- 2 Switch Scanning using the Bluetooth Switch and Springboard Lite.
-
In order for the Bluetooth Switch (BTS) to work with a communication device, the device must have a PRC Bluetooth Module installed in it. ...
- How do I Set Up an External Headpointer with the Springboard Lite?
-
If you want to use an external headpointer, it must have a USB connector.You can plug an external headpointer (or a USB joystick that acts l...
- How do I Use a Joystick with the SpringBoard Lite?
-
NOTE: The Joystick option is available only with the 32/36 location overlays.You must have an adapter to use a joystick with the Spring...
- I am Set to Keyboard Mode in the Access Method... What do all of these Features Do?
-
KEYBOARD OPTIONS:Acceptance TimeThis is the amount of time it takes for your device to accept a location you have touched and to activate th...
- Using 2 Switches to Scan with the SpringBoard Lite.
-
Plug two single switches or a dual switch into either the SWITCH A and/or SWITCH Bconnectors on the left side of your device.If you are unsu...
- Using a Single Switch (1 Switch Scanning) to Scan the SpringBoard Lite.
-
When you select 1 Switch as an access method, you see a screen that contains a number of ways to scan with one switch. Below are brief descr...
- What Access Methods are Available in the SpringBoard Lite?
-
An Access Method is the way you will control your device. Access Methods and their options are in the ACCESS METHOD MENU in the Toolbox.Warn...