Prentke Romich Company
http://www.prentrom.com/support/article/337

How do I Program a Macro to Turn Off the Scanning Beeps in my Liberator?

This macro will allow you to turn off the scan beeps when you are in a quiet environment like the Library. This macro is stored using the Macro Recorder.

To Turn Beep Off:
1. In your Toolbox, activate ALT + STORE . The display should read Macro Recording Started)

2. Activate FEEDBACK MENU.

3. Select 7777 (to get to screen 5).

4. Select I (Listen to/Change System Beeps).

5. Select 7 (to go to next screen).

6. Select 3 (Scan Step Beep).

7. Select 2 (Edit def inition of SCAN BEEP).

8. Activate CLEAR DISPLAY.

9. Activate SPACE (no definition for the beep: thus silence).

10. Activate STORE.

11. Select 555 (to exit from the sub-menus and menu).

12. Activate ALT + STORE.

13. Select 1 (Store Macro under Icon Sequence).

Display will read: <FEEDBACK MENU>77771732<CLEAR DISPLAY> <STORE>555

14. Activate STORE.

15. Select Icon Sequence: MUSIC THUMB DN.

16. Activate ENTER.

17. Select 5 (to Exit).

To Turn Beep On:

1. Activate ALT + STORE.

2. Activate FEEDBACK MENU.

3. Select 7777 (to get to Screen 5).

4. Select I (Listen to/Change System Beeps).

5. Select 7 (to go to next screen).

6. Select 3 (Scan Step Beep).

7. Select 3 (Go back to default SCAN BEEP).

8. Select 555 (to exit from the sub-menus and menu).

9. Activate ALT + STORE.

1O. Select I (Store Macro under Icon Sequence).

11. Display will read: <FEEDBACK MENU>77771733555

12. Activate STORE.

13. Selecticon Sequence: MUSIC THUMB UP.

14. Activate ENTER.

15. Select 5 (to Exit).