Prentke Romich Company
http://www.prentrom.com/support/article/331

How do I Set Up and Adjust the Daessy Desktop Mount?

You may have to make several adjustments to the Deskmount to achieve the right position.  Depending on the size of your communication aid,  you can set up the mount so the legs are facing towards or away from you.  Note:  Larger devices should have the legs facing toward you for more stability.

This picture shows the parts to a deckmount.

1.  Using the L-wrench that came in the package, loosen the silver bolt on the top of the black cylinder on the Deskmount and rotate the U shaped bar into an up position.

This is a picture of the Daessy Deskmount.

2.  On the Quick Release Mount, (QRM2) loosen the bolt and slide the collar onto the U shaped bar of the Deskmount.  Position the Quick Release Mount and tighten the bolt using the L-wrench once again.

This is a picture of the quick release mount in position with the device.

3.  Slide your communication aid into the Quick Release Mount and tighten into position.

This shows the mount in position.

Important:  To avoid accidents, you may need to remove the device to make any necessary adjustments to the Deskmount. Reattach the device when finished.

Note:  With large and heavy devices it is important that the the Deskmount be placed on a flat and steady surface to reduce any tendency to tip.  Also be aware that the Deskmount may slide about when the keyboard or touch screen is directly accessed.  If this occurs, additional modification may be necessary.