Prentke Romich Company
http://www.prentrom.com/support/article/254

How do I register the software?

IMPORTANT NOTE!

There is a Serial Number for your WiViK software printed on a white label on the WiViK CD. Write this number down on a separate piece of paper for future reference.  You will need to enter this number the first time you run your WiViK software.

This is a picture of the WiViK serial number on the WiViK CD.

IMPORTANT NOTE!

The following directions apply to the first time you run your WiViK software.  You must have WiViK installed on your computer before you can register your software.

NOTE:  If you do not register the software it will only work for 30 days and then expire.

Registering the WiViK Software:

Open the WiViK program.

You will see the following box:

Picture of wivik trial copy screen

Select Register.  You will then see this box:

Picture of wivik registration screen

Look at the serial number you copied from the WiViK CD onto a separate piece of paper.

Enter the first 3 numbers into the first box, the next 6 numbers in the second, box and the last 3 numbers in the third box.

The "WIV" at the end of the serial number is not used.

Select OK and the registration is complete.