Prentke Romich Company
http://www.prentrom.com/support/article/1612
Perhaps you and a friend each buy the same TV. Your friend adds the TV and programs the new TV signals into her device before you do. She can save her programming as an .mti file and give it to you to load into your device so you don't have to do the programming yourself.
· Make sure your USB flash drive or Secure Digital card is plugged into your communication aid.
· Open the TRANSFER MEMORY MENUI in the Toolbox.
· Select Save an IR Device.
· You see a page that contains all your IR Devices. Select the one you want to save.
· You see the "Save" window from your flash drive or your SD card. Your IR device is ready to be saved as an .mti file. If you want to change the name of the file, do so now.
NOTE: DO NOT change the .mti part of the name.
· Select Save.
· Select OK to exit.
· Make sure your USB flash drive or Secure Digital card is plugged into your communication aid.
· Open the TRANSFER MEMORY MENU in the Toolbox.
· Select Load an IR Device.
· If you want the device to replace one that is already in your device, select YES and then select the device you want to replace.
· If you do not want to replace an existing IR device, select NO.
· Select the .mti file that contains the device command and signals you want to load and then select Open.
· Select OK to exit.