|
Prentke Romich Company
http://www.prentrom.com/support/article/1570
|
The Carry Strap holders are on the bottom of your device.
|
At the end of each side of the strap there is loop connector and, on the strap side, a Quick Disconnect connector. Detach the loop connector from the strap by pressing in on the sides of Quick Disconnect connector.
|
Thread the loop through the carry strap holder.
|
Thread the connector through the loop and pull snug to the strap holder post.
|
Insert the loop connector into the strap connector until the two pieces click and hold together.
Repeat these directions to connect the other end of the strap to your device.
