How do I Reset my Headmaster?
Occasionally you may experience that your Headmaster is not working. There are many things that could have occured to cause the unit not to work properly, such as a button changed or a power surge.
First turn your computer off. Unplug the power supply oin the back of the Headmaster. Wait 30 seconds. Check to verify that one of the three buttons on the side of the Headmaster has not been bumped and accidentally pushed in or out. Adjust these buttons if needed. Plug power back in and boot computer back up.
Note: Remember if you are using a Griffin Imate to connect your Headmaster to a computer, your settings must reflect Macintosh mode, with the first button IN and the back two buttons OUT.
If after resetting, the Headmaster is still not working, please contact PRC Service for additional support. 1-800-262-1990