Linking a Remote Page to the Remote Activity in the Vantage Lite.

Here is an example of linking the Remote activity to theTV page.

1. Create the page you want to link. This must be done first. If the page is already created and your previous link was deleted, verify that the page you want to link to is still available by going into the Page Menu to find the page. In this case, the page name will be TV.

2. Select the Toolbox key on the top of the Vantage Lite.

3. Select MODIFY ACTIVITY.

This is a picture showing the Toolbox and Modify Activity tool.

4. Choose the main activity you want to link the page to. We will select the Remote activity. Since the Remote activity is the main activity and the TV key is a linking key within the Remote activity, Remote must be selected first in order to get to the TV key for modifying.

This is a picture of the remote activity key highlighted.

5. Select MODIFY ITEM WITHIN ACTIVITY.

6. Choose the key you want to link the page to. We will select the TV key.

This is a picture of the Go TV key highlighted.

7. Select SPELL TEXT TO DISPLAY

8. You may keep any spelled message you already have or

Select “Clear display” to not have any text appear with the key.

9. Select INSERT TOOL.

This is a picture showing the Insert tool key.

10. Select the tool - SET PAGE

This is a picture of the Set Page key highlighted.

11. Select the Page you want to link to. We will select the TV page.

This is a picture of the TV page that will be selected in this example.

12. Your top line should read as follows. Select OK.

This is how the text should look when the TV page is linked properly.

13. Change the icon and label if needed

This is a picture of where you can change the appearance of the icon and label on your key.

14. Your completed programmed screen should look as follows.

This is how the TV key should look when programmed properly.

15. Select OK to exit, when you are finished and give it a try.