How do I Save and Load an Activity in the Springboard Lite?
Save an Activity
1. Make sure your USB flash drive or Secure Digital card is plugged into your communication aid.
2. Open the TRANSFER MEMORY MENU.
3. Select Save Load Pages and Activities.
4. You see a list of all the Activities in your device. Select the Activity you want to save.
5. Spell a name for the file you are saving. You might want to include "activity" in the name to distinguish the Activity from other mti files.
6. The Activity is saved as an .mti file.
7. Activate OK to exit.
Load an Activity
1. Make sure your USB flash drive or Secure Digital card is plugged into your communication aid.
2. Open the TRANSFER MEMORY MENU.
3. Select Load Pages and Activities..
4. You see a list of files on your USB flash drive or SD Card.
5. Select the Activity you want to load.
6. The transfer takes place. The Activity is loaded into your PAGES MENU.
7. Activate OK to exit.
Tip: If you are not using the original Flash Drive shipped with your device, make sure you are using one that is 2GB or less. Flash Drives over 2 GB will not work properly in the SpringBoard Lite.
Note: If you are transferring the Activity you have saved into another device, that device must contain software equal to or newer than the software in the SpringBoard Lite in which you transferred from.