Pair and Configure your Bluetooth Cell Phone with your Vantage Lite.
Video (Click play button to start.)
This example uses the link to the Phone Configuration screen through Phone Dial Pad, however the MAINTENANCE MENU also has a Phone Configuration menu which is slightly different from the menu used in this article.
1. From the PHONE Activity Row, select the PHONE DIAL PAD key .
2. Select the Phone Configuration key. 
3. On your phone, go to the "Bluetooth Menu". To find this menu you may have to read the manual that came with your phone.
4. Put your phone in "discoverable" mode.
Note: "Discoverable mode" on your phone may be labeled "discoverable" or "paired" or "find me" or something else entirely. Different Bluetooth cell phones call the pair button different things. If you are unsure which option to select, look at the instructions that came with your cell phone.
5. On your Vantage Lite select the Pair to Phone key . 
TIP: If you are having trouble with the phone pairing to the device, try pulling the battery pack on the phone and re-installing it to see if the phone and device will pair now.
6. Your phone will display a message asking you to enter a passcode.
On your phone, enter four zeros: 0000. You must use this passcode. Then select OK or
the button on your phone that accepts your selections and exits.
7. When your cell phone is paired with the Vantage Lite you will see "Paired" or "Connected" in the Bluetooth Status box in the Phone Configuration Menu. You will also see Bluetooth cell phone icons in the Status Display Area of the Vantage Lite.
If your cell phone supports Bluetooth text messaging, you will see "Text Messaging Supported" in the Bluetooth Status box. If you do not see this message, your phone will not support Bluetooth text messaging.
IMPORTANT NOTE: Even with advanced technology, there are a very limited number of phones available that are capable of sending text messages using a Bluetooth signal. Compatible phones available by Sony Ericsson: W580, W350, W760a, W518a, Equinox TM717, and Motorola Moto z9n. These phones were tested using A T & T and/or T-Mobile wireless support which is GSM network.
Due to rapidly changing technology and phone models, the phones listed may have been discontinued since this article was posted. Before purchasing a new phone, take your device with you to your service provider for a list of available phones and try them out to insure compatibility.
Listing of specific phones and service providers is intended to help PRC customers find a compatible phone. PRC cannot provide support or instruction on cell phones or their use with AAC devices. PRC is not responsible for incompatible phones or signed phone contracts.
Bluetooth Icons Visible in Status Display Area
The green figure to the left of the cell phone indicates the battery charge. A blue phone indicates you are not using the phone.
The green phone indicates that you are talking on the phone.
This icon indicates that you are making or receiving a call.
The Paired Devices key allows you to view all the Bluetooth cell phones you have been paired with.
The Disconnect key allows you to disconnect (or "un-pair") from the phone you are currently using.
The Ringer Menu allows you to set the standard tones for Ringer and Notify Message. The ability to import ring tones will be available in future software development.
Also in the Phone Configuration menu are Internal and Audio Volume Controls. Internal Input Volume and Internal Output Volume refer to the VTL.
There is also an option to Turn Bluetooth Beep Output OFF/ON. When this is ON the person you are talking to will be able to hear your Vantage Lite beep as you make message selections. If you turn it OFF, the listener will not hear anything while you select your messages.