Importing Wav Files in the PASS.
PASS now allows you to import .wav files and store them as recorded messages.
Any Toolbox Menu that allows you to store recorded messages now has a button labeled Import Sound File that becomes active when you select Recorded Message. Instead of recording a message you can find a sound file that you have saved on your computer or have stored on a USB drive and store it as the recorded message.
Note: You cannot use sound files for prompts.
For example, in the picture above:
We are in the MODIFY ACTIVITY Menu and have selected the Modify Item Within Activity option. This is a storing screen. We have activated the Recorded option.
Activate the Import Sound File option.
Search for the file, folder or drive where you have sound files stored.
Select the file you want to use and activate Open.
You don't see anything happen, but the file will be used as your Recorded Message. Activate Listen to Recording to check that you got the correct file. When you have finished with this screen, save your changes by activating OK to exit. If you decide not to save any changes, activate Cancel instead of OK.
Note: If you have a previously recorded message assigned to a key and you import a sound file, the sound file will replace the recorded message. Any macros assigned to the key will remain with the key.