Changing the Switch Mode Settings on the Bluetooth Switch.
The Bluetooth Switch is set up at the factory to work with a PRC AAC device. You do not have to change Switch modes.
To use the Bluetooth Switch with a computer you must change Switch Mode Settings on the BTS.
You must also have the PRC Bluetooth Adapter.
To change the settings, turn the BTS OFF and use a sturdy toothpick or a straightened paper clip to slide the Mode switches.
Note: Turn the Bluetooth Switch OFF before you change modes!
SETTINGS | GRAPHIC OF SETTING |
USE |
Switch Mode Left switch to LEFT Right switch to LEFT |
| Use switch for 1 or 2- switch scanning with a PRC AAC device.
This is the default setting. You may need an external switch. |
Mouse Mode Left switch to LEFT Right switch to RIGHT |
| Mouse Mode Use switch as a computer mouse.
Must use with PRC Bluetooth Adapter and external switch |
Keyboard 1, 2, 3 Mode Left switch to RIGHT Right switch to RIGHT |
| Keyboard 1, 2, 3 Mode Use switch to emulate 1, 2 & 3 keys on a keyboard for switch access to PRC PASS.
Must use with PRC Bluetooth Adapter & an external switch. |
Keyboard ENTER, F11, F12 Mode
Left switch to RIGHT Right switch to LEFT |
| Keyboard ENTER, F11, F12 Mode Use switch to emulate ENTER, F11 & F12 keys for keyboard access to the WiViK program. Must use with PRC Bluetooth Adapter and external switch. |
