Instructions for Programming the Quick Phone in the ECO.
- ANSWER/HANG-UP – Set your phone on speaker phone, select Answer/Hang-up to get a dial tone. Select Answer/Hang-up again to hang up.
- REDIAL – redials the last number on the display
- BACKSPACE – takes a number off the display
- CLEAR DISPLAY – does not affect the Quick Phone, just clears the device display
- MEMORY KEYS 1 THRU 5 – You must program the Quick Phone memory keys to use these page keys. Not for programming in the device.
- NUMBER KEY PAD – Use these numbers to dial a number that you do not have stored.
- Programming a number onto a page key
· Select the set-up key on your device or select modify page from the toolbox and select the Quick Phone page you wish to modify.
· Select a blank key on the page.
· Select Spell Text for Message
· Select Insert Tool
· Select IR
· Select Quick Phone
· Select Toggle
· Select Insert Tool
· Select IR
· Select Quick Phone
· Select your first number
· Continue to program, inserting the toggle function before each numeral in the phone number that you are programming.
· Select OK when you are finished
· Program a label and optional icon on the key.
· OK.
To use the new key for a speed dial, you must select Answer/Hang-up to get a dial tone, and then your programmed key. You may also select the programmed key to put the whole phone number on the phone display, and then select Answer/Hang-up to dial the number on the display.