Transferring Memory Using an USB Flash Drive.
Important Note: The maximum size for USB Flash Drives is 8GB (may need to be formatted as a FAT 32) for Memory Transfers or playing sound files in PRC Devices. If trying to use a removeable disk larger than recommended, the device may not recognize the disk.
USB Transfer
1. Connect the USB memory device to the rectangular USB port on the case.
2. Go to the TOOLBOX and open the TRANSFER MEMORY MENU.
3. Change the MTI Method option to AUTO or USB Disk. If the USB device is securely in place, you will see a note telling you Disk Status: READY and the amount of space available on the card. NOTE: It may take a few seconds for the option name to change in the box after you select an up or down arrow.
4. Now select the memory transfer option you want to use.
NOTE: If you select the option to Save a file, type in the name for the file and select OK.
NOTE: If you select the option to Load a file, the list of file options will appear on your device. Select the file you want to load. The transfer will begin automatically.
5. When the transfer is done you will see the message Memory Transfer Complete on the device display. Select OK.
NOTE: If you are loading this vocabulary into another device, the unit you are transferring memory into must have the same, or higher,software version as the device you are transferring from or else the memory transfer will not take place.
IMPORTANT NOTE! Importing Sound (wav) Files You can import sound files while in storing menus(STORE CORE, CREATE or MODIFY ACTIVITIES/PAGES, ASSIGN KEYS, etc.). After connecting your memory device, it is a good idea to go first to the MEMORY TRANSFER MENU and select either AUTO, SD Card or USB Disk. Then begin the storing process for importing sound files.