How do I Teach Infrared Signals to my SpringBoard Lite?
Teach remote control signals for the devices that are in your REMOTES Activity.
1. Go to the Toolbox and open the IR SETUP MENU. 
2. Activate the arrow keys in the Device box to select the device whose signals you want to teach, e.g., TV.
3. When the name of the device you want is in the yellow Device box, activate the Modify A Device key option.
4. Activate the arrow keys for the Function box to select the function that you want your device to learn, e.g., "Channel Down".
5. Get your remote control ready. Know which button you want to press on the remote. Hold the remote infrared window 6-8" away from your device's IR window.
6. On your device, activate the Re-learn Signal key.
7. Press the function key on the remote control, e.g., the "Channel Down" key.
8. If you are near the appliance you want to be controlled, you can test the signal. Point your device's IR window toward the device you are testing (e.g., the TV) and activate the Test Signal key in the menu.
9. Repeat steps 4-8 for each function you want your device to learn.
When you have finished storing signals for an appliance, go to the remote control page for that appliance and explore what you have done!
1. Exit the IR SETUP MENU by selecting OK.
2. In the Toolbox, activate GO TO CORE.
3. Activate the Pages key on your overlay to find the Remotes page or the ECU page depending on the overlay you are using.
4. Select the remote page you want and see if your signals work.
Note: Remember to save your device memory after you have taught the remote control signals. You must save the Entire Device Contents in order for the IR Commands to save.