Changing the Advanced Settings in Output when Using the IRR.
****************************Important Note:**************************** These Settings should only be changed if more than one Infrared Remote Receiver is in use in the room. Adjusting these settings can prevent your IRR from working properly. If you are having trouble with the IRR, please try resetting the IRR first and verify that your software emulator is working properly.
To open the Advanced Infrared Setup Menu:
1. Go to the Toolbox.
2. Open the OUTPUT MENU.
3. Set Output Method to Infrared
4. Select the Advanced Settings option. This opens the ADVANCED INFRARED SETUP MENU.
ECO Unit Number = >1<
The default is Number 1. In multiple device situations, you can choose to be Unit 1, 2, 3 or 4.
EZ Phone Unit Number = >1<
The default is Number 1. In multiple device situations, you can choose to be Unit 1, 2, 3 or 4.
EZ Phone Baud = >1200<
The default is 1200. You can change to 300 if necessary.
IRR Unit Number = >1<
The default is Number 1. In multiple device situations, you can choose to be Unit 1 or 2.
IR Receiver Protocol = >PACKET<
The default is PACKET protocol. You can choose PIPELINE protocol, if necessary. See page 401 for protocol information.