How do I Import Icons into my ECO?
You must have graphics/icons stored on your USB Flash Drive or other removable media in order to import them to your device. Your device will import most of the graphics files that Windows® will support.
Transferring Icons
1. Plug your USB drive into your device.
2. Go to the Toolbox and open the TRANSFER MEMORY MENU. 
3. Select Import Icons.
If a flash drive is not being recognized by the device, you may need to reset the device by holding down the I/O button for 15 seconds then try the transfer again. If the flash drive is still not recognized, make sure you have any files on the flash drive backed up on the computer then check to see if the flash drive is formatted in a FAT 32 format. This can be done on a computer by opening My Computer and right clicking the removable drive. Now click FORMAT which will open a window where you can select FAT 32 under the FILE SYSTEM. Select START which will begin the format process. When finished, eject the flash drive and try the transfer again. If still no luck, try another flash drive.
4. You see a folder or folders where you have graphics/icons stored. Select the folder that contains the graphics you want. Select the graphics you want to import, or use Select All to select all the graphics/icons. Select OK.
5. You see the imported graphic and an option to change the name. You can also change the Aspect Ratio. We suggest you leave this set to YES. When you are ready, select OK.
6. You see the Icon Category Page(s). Your device automatically places the graphic in an IMPORTS category folder. If you want the graphic available in another Category, select the Category. If you just want to keep the graphic in the IMPORTS folder, select Cancel to exit the Category Page.
7. You see the TRANSFER MEMORY MENU. Select OK or Cancel to exit.
From now on, when you are in the Category Page, you will be able to use the imported icons in your IMPORTS folder.
Load Icons from an MTI File
Perhaps you know someone who has a PRC communication device with a lot of imported icons on it that you like. This friend saves his device vocabulary, which includes the imported icons, as an MTI file and e-mails it to you. You can load the imported icons from the MTI file into your device without loading your friend's vocabulary, too.
1. Save the MTI file from your friend on a USB flash drive or other removable media. Plug the flash drive into your ECO.
2. Go to the Toolbox and open the TRANSFER MEMORY MENU.
3. Select Load Icons from MTI File.
4. If you don't see the file you want, select the Up Folder button to choose a different file or folder. Select the MTI file you want to load.
5. Your device loads the imported icons into the IMPORTS Category folder.
Deleting Imported Icons
To delete Imported Icons in your ECO, you must go to one of your editing menus such as Modify Page, select any page, choose any key, then go to the Change Icon or Modify Icon key in the lower left corner. Select More Item to find the IMPORTS category. Select IMPORTS to view all your imported icons. In the lower left corner, select the key labeled Delete Icon then press the icon you wish to delete.