Storing a 1 Icon Theme in the Deltatalker.
Storing a 1 ICON THEME Tool Under an Icon Sequence On Your Overlay
Summary:
A example of storing a 1 ICON THEME with a theme icon and without a theme icon.
Overlay:
First, think of an icon sequence to store 1 ICON THEME under. HAMMER (tools) and BOOK (story) might be a good sequence.
1. Remove the keyguard and overlay. Turn the Toolbox On in the Control Panel. The TOOLS light will light.
2. Activate STORE either in the Control Panel or the Toolbox.
3. Activate INSERT TOOL (O1) in the Toolbox.
4. Activate 1 ICON THEME .
Important: At this point the DeltaTalker switches you from the Toolbox to your overlay. If you want to select a theme icon to go with the 1 ICON THEME , you must select it from the Unity overlay now. If you do not want to use a theme icon, select STORE now. If STORE is not on your Unity overlay, you must go to the Control Panel and select the STORE key.
5. If you want to select a theme icon to store with 1 ICON THEME select the icon that you want to use for the theme from your overlay (see note above) If you select the icon, INTERJ , you see: <I- ICON THEME (INTERJ)> .
5a. If you do not want to store a theme icon with the key , select STORE (see note above.) You see <1- ICON- THEME> .
6. Select STORE .
7. Select an icon sequence to store 1 ICON THEME under.
8. Select STORE .
1 ICON THEME is now stored under a sequence. When you activate this sequence, you will be in a 1 Icon Theme or you will be prompted to choose the icon you want to use to set the theme.