How do I Import Visual Scenes in an ECO?
Visual Scenes = A visual scene is a special Page you make that has a graphic on it that you have placed over keys you have selected.PROGRAMMERS TIP: This option is best used by the therapy team and programmers. You must be using the Touch access method.
You create and work with visual scenes much the same way as you do with any other page.
Importing a Visual Scene Page
You must have a graphic on your USB or hard drive to use for a visual scene.
1. If you are using a USB flash drive, plug it into one of the USB ports on your device.
When you plug the USB drive in, you will probably see a Windows Message Box for "Removable Disk," asking you what you want to do. Unless you are familiar with this message box and know what you want to do, we recommend you do nothing and just close the box or select Cancel.
2. Go to the Toolbox on your device.
3. Open the TRANSFER MEMORY MENU.
4. Select Import Scenes.
5. Select the drive you want. Select the graphic you want to use, then select OK. When you select graphics to import, you will see a green check mark.
6. You can choose Rename Scene and give the graphic a new name if you want. You can change the Aspect Ratio if you want. You can experiment with this to see what it does. Usually, maintaining the ratio is fine for most visual scenes.
7. Select OK when you are finished.
8. Select OK to exit the TRANSFER MEMORY MENU.