Attaching your Frame Clamp to your Wheelchair.
1. On the Wheelchair, select the location where you will be attaching the Frame Clamp.
2. Loosen the 2 bolts from the cap of the Frame Clamp until the cap is removed. Fit the cap of the clamp around the tube on the inside of the bar. Replace the bolts and tighten gently, alternating between the 2 bolts until each is tight.
The Cap should face towards the inside of the wheelchair and the Body should face away from the wheelchair.
3 On the outside of the Clamp, the body must be rotated around the Clamp so that the tube hole is vertical and the metal pin is pointing up.