How do I Transfer Memory from a DeltaTalker to a MAC?
NOTE: If your are using a MAC that has a Universal Serial Bus (USB) port you will need to purchase a USB Serial Adapter to plug in your MAC. These are available where ever Macintosh computers are sold.
1. Plug the MTI-6 cable that came with your MTI into the RS232 port on the DeltaTalker. Plug the other end of the cable into the modem port on your computer. This port has a picture of a telephone handset next to it.
2. Remove the keyguard and overlay from the DeltaTalker.
3. Activate the Tools key in the Control Panel.
4. Activate Transfer Memory (N2).
5. Activate the Next Menu Item key (F1) until you see MTI Baud = 57600. If the baud rate doesn't show 57600, push the Change >Item< key (G1), until you see 57600.
To Save Memory:
1. From the Transfer Memory Menu on the DeltaTalker, select Next Menu Item until Save Memory to Disk = NO is displayed.
2. Activate Change >Item> (G1) to see Save Memory to Disk = YES.
3. The screen on your computer will change and ask you to enter in a file name. Type in the name you want to use for the file you will be transferring. Then select Save.
4. On you display you will see, Memory Transfer in Progress, Please Wait, and the screen will display the bytes being transferred.
5. When the memory transfer is completed the screen will show, Memory Transfer Completed Successfully. Select OK.
6. On the DeltaTalker, exit the Transfer Memory Menu. Exit the MTI program on your computer.
To Load Memory:
1. From the Transfer Memory Menu on the DeltaTalker, select Next Menu Item until Load Memory to Disk = NO is displayed
2. Activate Change >Item> (G1) to see Load Memory to Disk = YES.
3. The screen on your computer will change and ask you to select the file to Restore. Select the DeltaTalker file you want to load. Then select Restore.
4. The screen will change and display Memory Transfer in Progress, Please Wait. You will see the bytes being transferred, and a status bar showing the progress.
5. When the memory transfer is completed the screen will show, Memory Transfer Completed Successfully, Select OK.
Exit the Transfer Memory Menu on the DeltaTalker. Exit the MTI program on your computer.