How do I Transfer Memory from a DeltaTalker to a PC/IBM?
Using the MTI for Windows:
1. Remove the keyguard and overlay and open the Toolbox.
2. All memory transfers should be made with the battery charger plugged in. Connect one end of the battery charger that came with your DeltaTalker to the charging connector on the top of the case. Plug the other end of the battery charger into a working wall outlet.
3. Plug the larger rectangular end of the cable (11977 cable) that came with your MTI program into Serial Port 1 on your computer. Plug the small round end into the RS232 connector on the top of the DeltaTalker case.
4. Turn the computer on. Insert the MTI CD into the CD drive. Use Windows Explorer or right click on My Computer and click on Explore to go to the drive that has the MTI in it.
5. Double click on MTI.exe. The MTI screen is visible on your computer monitor.
6. In the MTI Options menu, click on the name of the device you are using (i.e., 'DeltaTalker'). You can also change computer serial ports here and select a baud rate if you need to.
7. To Save memory to the computer: Go to the DeltaTalker Toolbox. Activate TRANSFER MEMORY MENU. Activate NEXT MENU ITEM until you see SAVE MEMORY TO DISK. Activate CHANGE >ITEM<. If every thing is connected properly, you will see Save Memory to File on your computer screen.
8. On your computer, go to the drive/folder where you want to save the DeltaTalker's memory.
9. Type in a name for the new file (e.g., DTMEM798). Click on Save. The transfer takes place automatically.
To Restore Memory to the DeltaTalker:
1. Go to the Toolbox. Select the TRANSFER MEMORY MENU. Select LOAD MEMORY FROM DISK.
2. On your computer, select the DeltaTalker file you want to restore (e.g., DTMEM798).
3. Click on Restore.