How do I Erase the Entire Contents of the AlphaTalker?
Summary: Use the forward-reverse 'Zorro' pattern to erase all the AlphaTalker II's memory at one time. Activate A-1, H-1, A-4, H-4, H-4, A-4, H-1, A-1. The AlphaTalker II beeps to ask you to verify. Select ERASE to verify.What if you want to erase all the messages in the device and you don't have a lot of time (or patience) for erasing them one by one? You can erase everything in the AlphaTalker II's memory at once by "Zorroing" the device.
To erase all the memory you must be in the Toolbox, you must press ERASE in the Control Panel, and then you must activate a special key sequence that looks like a forward and backward "Z". The keys are (in the following exact order):
A-1, H-1, A-4, H-4, H-4, A-4, H-1, A-1
When the sequence is activated correctly the AlphaTalker II beeps twice. Activate ERASE again to verify that you want to erase memory. The memory is then erased.
To Zorro the AlphaTalker II:
1. Remove the keyguard and overlay.
2. Press SELECT in the Control Panel and step to TOOLS. Press the ON/OFF side.
3. Press ERASE. Hear a beep.
4. Activate the following keys in the order shown: A-1 H-1 A-4 H-4 H-4 A-4 H-1 A-1.
5. When you hear the double beep, activate ERASE again.
6. Wait for the ERASE LED to go out, then return to the Control Panel and turn the Toolbox Off (press SELECT, then the ON/OFF side.)
