How do I Connect My Origin Headmouse to My Vantage/Vanguard?
Connecting an Origin HeadMouse to the Vantage:
NOTE: Before you begin make sure the Vantage and the HeadMouse are turned Off.
1. Find the cable that came with your HeadMouse. Plug one end of the cable into the USB port on the side of the Vantage/Vanguard. Plug the other end of the cable into the HeadMouse.
2. Use the Dual-Lock that came in your package to attach the Optical Sensor (smaller box with black circle on it) in between the two headpointing windows on the Vantage.
3. Plug the Optical Sensor power cord into the appropriate connector on the front of the Interface Box.
4. Place the thin reflective dot on your forehead, the bridge of your glasses or any other moveable location on your body where the Optical Sensor will be able to see it.
5. Turn the HeadMouse On (on the back of the Interface Unit), then turn the Vantage On.
IMPORTANT NOTE: Do not turn the Vantage on until you have turned the HeadMouse on first.
6. On your Vantage, select the TOOLS key (top right corner of the case).
7. In the Toolbox, select the Selection Technique Menu.
8. Select the Headpointing option.
9. Adjust the Acceptance Time so it is appropriate for the person using the HeadMouse.
10. Activate OK to exit the menu when you are finished adjusting the HeadMouse.