How do I program customized TV channels using my SpringBoard Plus?
To program a customized TV channel (for example, channel 256), you will create a macro for one key that contains the channels, 2, 5 and 6.
IMPORTANT NOTE! Your device must already know the signals for the functions on your remote control. If you haven't taught the signals to your device yet, do so before you begin this exercise. See the related article:
How do I teach TV commands to my SpringBoard Plus?
1. Open the TOOLBOX and select the MODIFY PAGE menu.
2. Select the More Items key until you see the TV REMOTE key. Select it.
3. Select the key you want to program with the channel 256.
4. Select Spell Text for Message.
5. Select Insert Tool.
6. Select More Items key until you see the tool, IR.
7. Select TV as your Device.
8. Select 2 as your Function.
9. Repeat steps 5-8 until you build the channel 2 5 6 as shown below.
10. You have now built the macro for channel 256.
The only thing left to do is to change the Icon and Label if you would like.
Select OK when finished.
14. The next time you go to the TV page you will see your custom channel.
