Save/Load Pages and Activites
Save/Load Pages and Activities
Save a Page or Activity
· Make sure your USB or Secure Digital card is plugged into your communication aid.
· Open the TRANSFER MEMORY MENU.
· Select Save Pages/Activities.
Important Note: If the flash drive is not recognized, make sure you have any files on the flash drive backed up on the computer then check to see if the flash drive is formatted in a FAT 32 format. This can be done on a computer or on the Windows side by opening My Computer and right clicking the removable drive. Now click FORMAT which will open a window where you can select FAT 32 under the FILE SYSTEM. Select START which will begin the format process. When finished try the transfer again. If still no luck, try another flash drive.
· You see a list of options. Select the one you want.
· Select the Page(s)/Activity(ies) you want to save.
· You see where your item(s) will be saved. Most often the D: drive is the pre-set folder for the USB Removable Media or flash drive. Select OK or choose a different folder.
· Spell a name for the file you are saving. You might want to include "page" or "activity" in the name to distinguish it from other mti files.
· Your item is saved as an .mti file.
· Select OK to exit.
TIP: If you are using a Unity MAP, these instructions work for both Pages and Activities.
Load a Page or Activity
· Make sure your USB or Secure Digital card is plugged into your communication aid.
· Open the TRANSFER MEMORY MENU.
· Select Load Pages/Activities.
· You see a list of files on your USB flash drive.
· Select the item you want to load.
· The transfer takes place.
· Select OK to exit.
TIP: If you are using a Unity MAP, these instructions work for both Pages and Activities.
NOTE: Your new page or activity will load into the User Area you currently are in. After loading a new page/activity into your user area you may need to relink the page to a key to have access to it.