Releasing from Shipping Mode
Plug in the battery charger and then press and hold the BACK ON/OFF button.
 |
1. Plug the battery charger that came with your device into the battery charger jack in the connector module on the back of your device. Plug the other end of the battery charger cable into a working wall outlet.
2. On the left side of your case, towards the top back, press and hold the BACK ON/OFF button until it glows blue. Then release it. Your device will boot up. This may take a few minutes.
3. Leave the battery charger plugged in until the Charging LED on the front of the case begins to flash very slowly or stops flashing. This may take awhile. ÜA slow flash indicates the batteries are full but the charger is plugged in.
4. To continue setting up your device, follow the directions you see on your display screen.
5. From now on, use the FRONT ON/OFF button on the front of the case 
to turn your device Off and On.
NOTE: You will rarely use the BACK ON/OFF button.
For normal, everyday On/Off use, always use the FRONT ON/OFF button to turn your device Off and On.
· You will use the BACK ON/OFF button the very first time you turn your device On. When your device is On the BACK ON/OFF LED will glow blue.
· You may have to use this button if you are having problems with your computer and Windows®.
· You will have to use this button if you are removing your device from Ship Mode. See the Help information in your device for the MAINTENANCE MENU/Battery Menu/Ship Mode option.
When you turn your device OFF using the FRONT ON/OFF Button , the BACK ON/OFF LED will blink blue to indicate that it has gone to sleep. When you turn your device back ON using the FRONT ON/OFF button, the BACK ON/OFF LED will stop blinking and glow blue again.
The FRONT ON/OFF LED will glow green when your device is on. It is unlit when your device is off.