Adding a Color Frame to the Vantage Lite 2
Your new Vantage Lite comes with several different color frames. You can change the band of color around your device by exchanging color frames.
TIP! The BLUE Color Frame is installed at the factory for you and must be removed first if you wish to install a different color.
To Remove the Color Frame
|
Put your finger in one of the slots above the strap holder on the bottom of the device. Pull up. This will take some force. When the color frame comes loose, continue to unsnap and pull it from your device.
To Add a Color Frame
Place the top of the color frame into the groove for it on the top of your device.
Fit the frame into the groove around your device. There are small tabs at each mid-point on the color frame that fit into small latches on your device.
At the bottom you may have to press the frame out and down to make sure it is overthe corners of the device.
Now press the midpoints of the color frame until they snap into place around the device. Then press each corner until you feel it snap into place.
The frame is made to fit snugly on your device. If you see a gap between the frame and your device, press a midpoint or a corner on the frame to make sure it is latched to to device.
When the frame is on, snap in the bottom, sides and top to make sure they are locked into place.