Linking an IR Command to a Page in ECO2
IMPORTANT NOTE! Your device must already know the signal for the functions on your remote control. If you haven't taught the signal to your device yet, do so before you begin this exercise.
1. With the Page open where you want to add the IR Command to, select the Set-Up key (#2) on the top of the case.
2. Select the key you want to program the IR Command under.
3. Select Spell Message or Define Key Function
4. Select Insert Tool. 
5. Select More Items until you see the tool, IR 
. Select it.
6. Select the Device your Signal is stored under. Our example shows TV
7. Select the IR Command you want to store..
8. Select OK once command appears in text bar.
9. Now you can Change the Icon and Label in the lower left corner if you would like.
10. You can now either select Choose Next Key to Define to program in another channel or select OK to exit.
The next time you go to the TV page you will see your custom channel.