Setting up my ECO2 to Scan using 2 Switches
2 Switch Scanning Methods- Your options and an explanation of them.
Plug two single switches or a dual switch into either the SWITCH A and/or SWITCH B connectors on the left side of your device.
Auto Scan Directed
Your device automatically scans the keyboard. Change directions by activating your switch.
Hold Scan Directed
You must press and hold your switch to scan the keyboard. Change directions by releasing and then pressing and holding your switch.
Note: At this time directed scans will not allow you to scan the Word Prediction list.
Step Scan
You must activate your switch each time you want to move to a new position on the keyboard.
Linear Scan
This allows you to step through the keys on your overlay moving from left to right across the rows or from top to bottom down each column. You must activate your switch to move the scan.
Row/Column
The scan highlights each row of keys beginning with the top row and moving down the screen. When the row that contains the key you want is highlighted, activate your switch. The scan will highlight the separate columns in the row you selected, moving from left to right across the screen. When the key you want is highlighted, activate your switch. The device beeps when your key is accepted.
Column/Row
The scan highlights the columns first instead of the rows, moving from left to right across the screen. When the scan reaches the column that contains the key you want, activate your switch. The scan begins to highlight each key in that row. When the key you want is highlighted, activate your switch. The device beeps when your key is accepted.
Quarter Row/Column
Quarter Column/Row:
The scan divides the overlay into quarters. When the scan reaches the quarter you want, activate your switch. The rows or columns in that quarter are scanned. Select the row or column you want. Individual keys are then scanned. Select the key you want. You can select Auto, Hold or Step to scan and you select to have an extra hit at the end of your selections.
2 Switch Scanning Options - Features and what they do.
The scanning options that are available in this menu depend on the Scanning Method that is selected. Scanning options vary between Step, Auto, and Hold selections.
Step Scanning settings should look similar to the options below:
Auto Scanning settings should look similar to the options below:
Hold Scanning settings should look similar to the options below:
Windows Access Settings
Magnification works when your ECO is in a Windows application.
When Magnify Window Clicks is ON you can select an area in your Windows application and it will appear in a magnified box. This makes it easier for you to select the options you want in your application.
Magnification Factor: how large do you want the area magnified—2 times larger (2X) 4 times larger (4X)?
The Magnification Area (in number of pixels) is the size of the area you are magnifying.
We recommend that you select different numbers for Factor and Area and try them out in an application on your ECO. You'll then have a good idea of what works for you.
Acceptance Time
The amount of time you must maintain contact with your switch before the key you have scanned to is accepted. The device beeps when your key is accepted. For example, if you set acceptance time for .50 seconds, you must activate and hold your switch for ½ second before the key will be selected and the device beeps.
Release Time
This tells your device how long to wait after you release your switch before you can make another activation with the same key or switch. For example, if you set the Release Time for 1 second, you must wait one second after you release your switch before you can continue to scan or activate your switch. If you release your switch and then accidentally activate it again before the release time has passed, your device will not make any activations.
Auto Repeat
This lets you choose how fast a key will repeat when you hold it down.
Predictive Selection
This option works hand-in-hand with Icon Prediction. (Icon Prediction is in the FEEDBACK MENU and the default is ON.)
When you turn Predictive Selection On, your device highlights only those icons where messages are stored. These highlighted icons are the only keys on the keyboard that will produce a response.
Note: Icon Prediction will work whether Predictive Selection is On or not.
Scan Speed
This is the amount of time it takes for your device to move from one key, row, or column to the next in a scan. The default scanning speed is one second. This means it takes one second from the time one key is highlighted until the next key is highlighted.
Selection Type: Manual/Auto
If you select Manual, you must have a third switch plugged into your device. You will use this switch to make your final selection.
If you select Auto, your device will automatically select the key you have scanned to after the Acceptance Time has passed.
Activation Delay
This gives you a few seconds to change your mind when you have selected a key. This is automatically set to your Scanning Speed. For example, let's say your scanning speed is set to one second (1.0). You scan to and select a key, then realize it's not the key you want. You have one second to activate your switch again to "de-select" the key and then scan to a new key.
Scan Auto Restart
When this is On, a new scan will automatically start once you have made a key selection. If it is Off, you must activate your switch to start a new scan.
Cancel Time
If you are in the middle of a scan, get distracted, and forget to activate your switch to make a selection, the scan will stop and the highlighting will disappear after the Cancel Time has passed. If you need a lot of time between switch activations, you can set the Cancel Time to a very long time before the scan stops.
Modify Scan Pattern
This allows you to make changes to the default scan pattern. You can select the Preview key on this menu screen and see the scan move as you create it. You may want to use this option for selected Pages, especially with Context Scenes.
Bluetooth Switch
See pages 16 and 18- 25 (1 and 2-switch) in the Bluetooth Switch mini-manual for complete information. Once you have your access method options selected, set the Bluetooth switch to the default Switch Mode; plug in an extra switch if you need one; select Bluetooth Switch in the ACCESS METHOD MENU. Press the PAIR button on the Bluetooth Switch, then select the Pair with Switch Button on your device screen. You will see a box on your device screen telling you when the pairing is complete and the device and switch are connected.