How do I Save/Load a Page on my ECO2?
Save a Page
1. Make sure your USB or SD card is plugged into your communication aid.
2. Open the TRANSFER MEMORY MENU.
3. Select Save Pages and Activities.
4. You see a list of all the Pages in your device. Select the Page you want to save.
5. The ECO tells you where it will save the Page. Select OK or choose a different folder.
5. Spell a name for the file you are saving. You might want to include “page” in the name to distinguish the Page from other mti files.
6. The Page is saved as an .mti file.
7. Activate OK to exit.
Load a Page
1. Make sure your removable media is plugged into your communication aid.
2. Open the TRANSFER MEMORY MENU.
3. Select Load Pages and Activities.
4. You see a list of files on your USB or SD card.
5. Select the Page you want to load.
6. The transfer takes place. The Page is loaded into your PAGES MENU.
7. Activate OK to exit.
Important Note: If a flash drive is not being recognized by the device, you may need to reset the device by holding down the I/O button for 15 seconds then try the transfer again. If the flash drive is still not recognized, make sure you have any files on the flash drive backed up on the computer then check to see if the flash drive is formatted in a FAT 32 format. This can be done on a computer by opening My Computer and right clicking the removable drive. Now click FORMAT which will open a window where you can select FAT 32 under the FILE SYSTEM. Select START which will begin the format process. When finished, eject the flash drive and try the transfer again. If still no luck, try another flash drive.