How do I Store a Recorded Message in the Core Vocabulary in my Pathfinder?
To Store a Recorded Message:
1. Decide what you want to say (or do) and the icon sequence you want to use.
2. Select the STATUS button twice to the left of your display.
3. Activate the STORE CORE key on you display.
4. Activate the icon sequence you decided to use. Activate the OK key.
5. Activate the Type of Message key until you see Recorded. If you want to include written text that will be displayed while your message is spoken, activate SPELL TEXT FOR MESSAGE and type in the text you want to have displayed. Activate OK when you have finished.
6. Press and hold the Record Message option. While you are holding the Record Message option, speak your message into the microphone at the top right corner of the Pathfinder case. Release the Record Message option as soon as you have finished recording.
7. To hear your message before you leave the menu, activate the Listen to Recording option.
To Erase a Message and Re-record it
1. Select the STATUS button twice to the left of your display.
2. Activate the ERASE CORE key on your display
3. Select the icon sequence you want to erase.
4. You will receive a message asking “Are you sure you want to erase the message?” Answer YES if you want to erase. Answer NO if you change your mind.
Note: To Edit a recorded message, you must erase the message and re-record it using the steps listed above.