How do I Reset to Factory Defaults in the SpringBoard?
Reset to Factory Defaults
If you want to erase all custom vocabulary and return your SpringBoard to its original state, you can do this by selecting the Reset to Factory Defauls option in the MAINTENANCE menu. All of your User Areas will be re-set exactly the way they were when you received the SpringBoard from PRC.
1. Select the Tools key.
2. Select the Maintenance Menu.
3. Select the Reset to Factory Defaults option.
4. You see a message box that says "Are you sure you want to erase everything?".
If you want to continue with the reset, select YES. If you want to cancel the reset, select NO.
5. The reset may take up to ten minutes on a SpringBoard Plus unit.
6. When the reset is complete, select OK to exit.
7. Select Go To Minspeak to return to the main overlay.
Note: The voice quality will not be quite as good as it was originally.
IMPORTANT! If you have custom vocabulary in your device that you wish to keep:
Perform a memory transfer before you reset to factory defaults. If you do not do this, all custom vocabulary will be lost.