MP3 Player Menu Options
WARNING: PRC reminds you that MP3, WAV and WMA files are under the jurisdiction of all copyright laws.
If you have sound files stored on a USB flash drive or a Secure Digital card, you can play them on your communication aid. Plug the flash drive or secure digital card into your device, open the MP3 PLAYER MENU in the Toolbox and select the options you want. You can play all the songs on your flash drive or SD card; you can create playlists; you can skip and repeat songs; you can talk while the songs are playing and many other options.
NOTE: Before you can use the MP3 Player Menu, you must assign the MP3 PLAYER MENU tool to a key or sequence. See the Basics manual for instructions about assigning tools.
MP3 Player Menu Options and Explanations:
Previous - Select Previous to listen to the song before the one currently playing.
Play - Your device will play songs according to how the Play Source is set: AUTO/Playlist/SD Card/USB Disk. Unless you press Stop, music will continue to play until all the songs on the source have been played.
NOTE: You can pause a song by pressing the PLAY button.
Next - Select Next to listen to the song that follows the one that is currently playing.
Playlist - Your device can play the playlist that is currently loaded. You must create your own playlists. Use this option to create, open and edit playlists.
Stop - Select this option to stop listening to music.
Repeat: OFF/1/ALL
OFF - no songs will repeat.
1 - repeat the song that is currently playing. The song will repeat until you select Stop, Next or Previous.
ALL - repeats an entire playlist or all the songs on a flash drive or SD card.
Shuffle: OFF/ON - When this is ON, your device will play songs in a random order.
Earphones - Turn this option On if you have earphones plugged into the device.
Play Source: AUTO/Playlist/SD Card/USB Disk
This tells your device where to find your songs. Select AUTO for most occasions.
AUTO - Your device will play the current playlist. If no playlist is loaded, it will look for songs on the USB drive or an SD card. If both are plugged into your device, your Pathfinder will play the songs on the device that was plugged in last.
SD Card/USB Disk - Your device will play every song on the SD card or the USB disk.
Playlist - Your communication aid will play the playlist that is currently loaded. If no playlist is loaded, you will hear a beep to remind you to load a Playlist.
Speech Break: Pause/Stop/OFFÂ - This option controls what happens when you want to speak while a song is playing .
Pause - When you select this option, the music will pause while you speak and resume playing when you have stopped speaking.
Stop - When you select this the music will stop playing altogether. When you have finished speaking, you must go back into the MP3 Player Menu and select Play.
OFF - If you select OFF, you cannot speak while music is playing. Off tells your device, "No speech break."
EQ Volume - This equalizes the volume between different sound files. It will also lower the sound volume when you want to speak while music is playing. This option is independent of your device's speech volume control.
Bass and Treble - These two options allow you to customize the bass and treble sound levels.